Commodore 64 Emulator - Hoxs64 v1.1.2.7 - Released
- Details
- Category: Windows
What's New:
1. Added option to always quickload host .PRG files.
2. Added REU size and REU file image options to the save settings.
GroovyMame v0.273 SR v2.21d - Released
- Details
- Category: Multiple Platform
What's New:
Based on MAME 0.273.
HP Calculator Emulator - Free42 v3.1.12b - Released
- Details
- Category: Android
What's New:
* Rolling back the beeper fix from the previous release. It was not performing as intended. Back to the drawing board.
Dosbox-X v2025.01.01 - Released
- Details
- Category: Multiple Platform
What's New:
- Fix bug that prevented the Configuration GUI from saving to dosbox.conf the last Windows 3.1 theme you applied using the dropdown menu. (joncampbell123).
- Add option to apply vmemdelay to SVGA and linear framebuffer modes (such as VESA BIOS modes), which reduces emulator performance for those modes, but allows you to emulate slower SVGA cards. Due to how some machine types are emulated, this option also enables vmemdelay to affect the PC-98 linear framebuffer, Tandy & PCjr video modes, as well as MDA/Hercules. (joncampbell123).
- Add workaround to CPU reset logic that allows it to work correctly even with dynamic core. Previously, if the guest reset the system,
the emulator would crash with an error message about an uncaught C++ exception because C++ exception handling doesn't work with dynamically generated code. (joncampbell123). - Correct CPUID family/model/brand values for cputype=pentium_iii. Add CPUID level 2, which returns "processor configuration
descriptors", and return documented Pentium III values. Apparently Windows XP really REALLY cares about these configuration
descriptors and will hang in-kernel in an infinite loop at bootup without these apparently really important values. This change makes it possible to boot Windows XP with Pentium III emulation. (joncampbell123). - Allow values of memsize to represent 4GB or more of RAM. Up to 1TB, if Pentium PSE extensions are enabled, the memalias setting
is 40, and "enable pse=pse40" in the conf file. Memalias maximum is now 40, instead of 32. Add code to provide that memory above
the 4GB address mark when PSE is in use by the guest OS. Added dosbox.conf option to specify a memory file. When specified, all
guest memory is memory-mapped from a file on disk, rather than allocated from host memory or host swap file. To avoid consuming
too much RAM on the host, a memory file is REQUIRED to emulate memory at or above 4GB. For best performance with the memory file, make sure the filesystem you place it on supports sparse files, including Linux ext4 and Windows NTFS. (joncampbell123).Fix EGA machine type to determine whether CGA RGBI or EGA RrGgBb display is active by vsync polarity, instead of the length of htotal. Several online references state that vsync is negative for 350-line modes, including 350-line to an MDA monitor. This also allows the "enhanced" EGA 320x200 modes in Rambo III to display colors correctly. (joncampbell123). - Dynamic x86 core: Reflect STI instruction to normal core so that the 1-instruction delay is correctly emulated. This makes it possible to run Windows XP or Server 2003 with dynamic core and SYSENTER/SYSEXIT emulation without random BSODs (joncampbell123).
- Fix default code page. Instead of assuming 437 at all times, use 437 for all IBM PC compatible modes and 932 for PC-98 emulation. (joncampbell123).
Thomson 8-bit Computer Emulator - DCMOTO v2025.01.01 - Released
- Details
- Category: Windows
What's New:
- The SDDRIVE EPROM program is updated to version 2025.01.01.
- Discontinued support for Compactflash cards and older SD card controllers: SDANIM7, ARDDRIVE and SDSTREAM.
To emulate these older devices it is still possible to use previous versions of dcmoto. - New version of .sddrive files to restore emulator state on real MO5, MO6 and TO7/70 with SDDRIVE.
These new files are no longer compatible with old CS91-280, SDDISK and SDSTREAM controllers.
To create compatible files it is still possible to use previous versions of dcmoto. - Improved SDMO interface simulation to ensure compatibility with SDMODISK controller.
- Replaced the CS91-282 controller (obsolete) with the new SDMODISK controller for MO5.
- Fixed a bug preventing the SDMO interface from working since version 20190411.
Atari 2600 Emulator - Stella (Windows ARM) v7.0 - Added
- Details
- Category: Windows
This an unofficial build of Stella for Windows running on an ARM-based processor.
Thomson MO5 Emulator - Maurice v1.2.1 - Added
- Details
- Category: Multiple Platform
This is an emulator of Thomson MO5.
Wolfmame (32bit) v0.273 - Released
- Details
- Category: Windows
What's New:
Updated to latest MAME source.
NegaMAME v0.273 - Released
- Details
- Category: Multiple Platform
What's New:
- Updated to latest MAME Source.
Multiple Computer Emulator - Emu80 v4.0.498 - Added
- Details
- Category: Multiple Platform
Emu80 is an open multi-platform emulator of old Soviet home computers: Radio-86RK, Apogey, Partner, Mikrosha, Mikro-80, UT-88, Elektronika KR-04, Orion-128, Specialist, Eureka, Lik, Specialist-MX, Sura, Vesta, Hobby, Vector, Lvov, Corvette and their modifications. The emulator has a user-friendly interface, has rich customization options and is distinguished by accurate support for the features of the emulated platforms.
ROM Organizer - oxyROMon v0.20.1 - Released
- Details
- Category: Multiple Platform
What's New:
- Fix an import issue with Progetto MAME DATs
- Leave arcade CHDs untouched in convert-roms and rebuild-roms
- Fix a regression preventing directory imports
- Fix a crash in sort-roms when ROMs have no extension
MAME Frontend - Erockus ARCADE v12.7 - Released
- Details
- Category: Multiple Platform
What's New:
- Updated for MAME .273
dgVoodoo v2.84.1 - Released
- Details
- Category: Windows
What's New:
- Fixing a minor bug in the new shader code translator
- Fixing a bug in a frontend optimization (Insane 2)
- Fixing the handling pf BC5 textures in the backends (Timeshift)
- Fixing a screenmode switching problem (Planet of the Apes)
Xenia Frontend - Xenia Manager v2.2.0 - Released
- Details
- Category: Windows
What's New:
New Features & Improvements
Game Parsing Without Xenia (#214)
- Introduced a new method for parsing game details that does not rely on Xenia.
- This feature is a lightweight port of the Xbox360Toolkit.
- To use, enable the Automatic Game Parsing and Selection option in the settings.
- Fallback: If titleid or mediaid cannot be retrieved, the system will revert to the previous parsing method.
- Supported Formats:
- STFS
- XEX
- ISO
- GOD (limited to main file reading; .data files are unsupported but sufficient for Xenia Manager needs).
- Future Plans: Pending bug fixes, this feature may evolve into a Scan Directory tool, similar to PR #191 by @JakariaMods.
Optimized Game Settings
- Thanks to @A1eNaz, the list of games with optimized settings now includes 200 titles!
- View the complete list here.
Bug Fixes
- Outdated URLs for GameInfo: Resolved an issue where old URLs were being used to fetch GameInfo.
- Profiles Not Saving (#215): Fixed an issue causing logged-in profiles not to save when closing the game due to CreateSymbolicLink failures.
Xbox Emulator - xemu v0.8.1 - Released
- Details
- Category: Multiple Platform
What's New:
nv2a/psh: Handle 3D textures in BUMPENVMAP[_LUM] modes
Wolfmame v0.273 - Released
- Details
- Category: Multiple Platform
What's New:
Updated to latest MAME source.
Page 15 of 81