Releases for Windows operating systems.
- Details
- Category: Windows
What's New:
Google Translate:
- Implemented romaji input for kana. (Thanks to Windy)
- Changed the key auto input to change the key matrix like the actual key operation.
* The old specification forced key interrupts from strings, but this is not recorded in the replay.
* Romaji input uses automatic key input internally, so replays will not be recorded correctly with the old specification.
* Since the key matrix is recorded in the replay file for each frame, the actual input can be reproduced.
- Added mutex for key matrix handling. Prevent matrix from changing during key scan.
- Improved the accuracy of the number of generated samples for PSG/FM sound sources.
- Fixed the number of audio samples per frame during replay playback/recording. (For PSG status reproduction) Changed replay to record only frames with key matrix changes.
- Fixed the problem that if there is no newline at the end of the last line, it was missed when reading the file for automatic key input.
- Corrected that TAB? was output when switching Kana-Kana (SHIFT+PAGE).
- SAVE fixes anywhere. IFF,IFF2,Halt of CPU could not be saved correctly.
- Fixed first frame of replay not playing.
- Changed the encoding of this file (Readme.txt) from Shift JIS to UTF-8.
- Details
- Category: Windows
What's New:
- fix missing render updates when debugging/changing parameters in pause mode (10.7.0 regression)
- show bulb in UI/viewport
- fix primitive animations getting stuck
- fix primitive animation speed being dependent on the framerate
- fix material list combobox not updating
- fix missing decal UI updates (e.g. width,height)
- fix loading of greyscale/8bit JPEGs (10.7.2 regression)
- fix crash when bumper skirt is not visible
- do not fail to load a table if only the hash/checksum fails, but instead just output a warning
- do not attempt to play "" reel sound (which otherwise polluted the debug outputs)
- update BASS library to 2.4.17
- Details
- Category: Windows
What's New:
- Add tape convert operations into "Tape audio workshop" window;
- Review of configurable toolbar buttons;
- Support Albireo SD mode to share files with Windows;
- Improve ASIC emulation;
- Split emulator and device settings;
- Fix minor bugs.
- Details
- Category: Windows
What's New:
- The update only contains a small 3rd party lib update mainly to put zlib to a current status.
- Details
- Category: Windows
What's New:
- Disable snapshot saving when emulation thread running
- Some GUI adjustments
- Details
- Category: Windows
What's New:
- cdrom/emu/help: chd compression (thanks null for many test cases)
- cdrom/emu/help: pbp compression (partially supported, without encryption)
- irq: more accurate port 1F8010F4h dma irq handling (and removed alone_fix)
- windows: closes child windows (help,iomap,tty,etc) on exit (regain keyb focus)
- windows: uses SendNotifyMessage instead SendMessage for broadcast (avoid hang)
- bios clone: cd-audio player shows both left/right waveforms (white/gray)
- spu: bugfixed capture (voice 3 was accidently written to 400h instead C00h)
- cdrom/setup: scex mode optionally normal, unlicensed, dumb/stealth modchip
- cdrom: command 04h,05h,10h,11h,1Dh trigger error 80h when disk is stopped
- cdrom/emu: allocates larger cue sheet (for many tracks with multiple indices)
- cpu: conditional jump reserved bits (emulated, with optional warning)
- cpu: conditional bltzal/bgezal always set ra=$+8 (even when condition=false)
- cpu: emulates mul/div timings, fixed JALR opcode (for unstable rd=rs)
- cpu: emulates lwl/lwr as generic 'any_mem_ecx_mac' memory access
- cpu: emulates irq triggered after NEXT opcode after SR.bit0 changing 0-to-1
- cpu: emulates opcode.bit26-27 stored in cause.bi28-29
- cpu: allows/warns on unused/mirrored COP0 opcodes (vs invalid TLB opcodes)
- timers: fixed cmall clock cycle leak in process_event function
- gte: supports cop2 disable, emulates cop2cmd timings
- gte: accurate mvmva glitches for Vx=2 and Mx=3 (thanks mednafen source code)
- gte: fixed overflow flags for nclip/gpl
- gte: reading IRGB/ORGB registers takes 1 extra clock cycle (when gte busy)
- cop1/cop3: supports dummy cop1/cop3 opcodes (when enabled in SR.bit29/bit31)
- cop0: emulates glitchy jf/jt/lwc0/swc0 opcodes (versus SR.bit28)
- compression help: added note on BIOS/GUI using same LZSS as Destruction Derby
- kernel/help: added notes on NOPs in exception handler C(06h)
- debug/ass/dis: movl/movr opcodes (alias for native lwl/swl/lwr/swr opcodes)
- debug/iomap: resolves DMA control flags (IE,IF,prio from DICR/DPCR)
- help: added dtl-h2000-only CDROM kernel functions; in A(79h) .. A(8Fh) range
- help: added note about faulty SetSession TOC reading in older cdrom firmwares
- help: added note on undocumented cause.bit30 (branch delay condition)
- a22i: fixed slt(i)(u) opcode in native asm syntax
- file formats: blaster master chunks, ape escape sound archives, xz, upx, bm
- Details
- Category: Windows
MagicUAE23 is an optimized configurations set for WinUAE.
Every configurations has the closest display and behavior of the original models.
- Details
- Category: Windows
What's New:
- Regression fix to save joystick settings the to registry; put back missing key values "Joy1GUID" and "Joy2GUID".
- Details
- Category: Windows
What's New:
- Possible crash fixes (fingers crossed)
- Fixed zip files not being cleared from list after a successful job
- Slight speed improvement and (hopefully) improved reliability when cancelling jobs